CERTIFICATION IN INDIA

INSPECTION SERVICES

An Inspection Programme is “Checking a product or system against the standards set by the International or National Organization or itself. Shamkris Global provides both second & third-party inspection services. A third party inspection is an assessment performed by an organization that is an independent company/ and constituted to conduct inspection work, that is neither owned, operated, nor controlled by a manufacturer, vendor, or supplier. Shamkris Global offers impartial assessments to develop confidence in client’s manufacturing systems that delivers the right product to the user. Our emphasis is on a quality inspection from both the industry and customers viewpoint with a reasonable fee schedule and performed in a timely manner.

The objective of the Company has always been to produce accurate and independent representations of the various commercial transactions with respect to the materials involved so that the customer feel confident about the quantity, quality of the product/process. We believe that apart from making good quality products, closeness to the customer is equally important. Shamkris Global Inspection Services Pvt. Ltd. offers various inspection services worldwide and these services with accreditations where applicable, whilst following a uniform management system.

We deliver the following Inspection Services:

Visual inspection is a common method of quality control, data acquisition, and data analysis. Visual Inspection, used in maintenance of facilities, mean inspection of equipment and structures using either or all of raw human senses such as vision, hearing, touch and smell and/or any non-specialized inspection equipment.
Third Party Inspection services refers to independent inspection services that are provided by inspection agencies. This article supplies you with information about TPI definition, TPI companies and also provides you with third party independent inspection procedures for the different fix, rotary, electrical and instrumental equipment.
The article supplies you with information about the second party and third party inspection process in the manufacturing shop. This content also provides lots of other articles for shop inspection practices for each equipment type.
The factory acceptance test (FAT) refers to the functional test that is performed by the vendor upon completion of the manufacturing process to prove the equipment has the same specification and functionality that indicated in the datasheet, specification and purchase order.
The inspection and test plan article provides you with information about inspections and tests which are used in manufacturing shops. In addition there are lots of linked articles which provides specific information about inspection and test plan for each equipment type.
Shamkris Group, Provides Global Commodity Inspection Services and limited to the industrial equipment such as pumps, valves and pressure vessels. This article provides you with information about second and third party inspection activities, which are done to confirm that delivered commodities, have the same specifications stated in the purchase order.
The articles are about different inspection field categories such as shop inspection, site inspection, and in-service inspection requirements. The articles present you applicable codes and standards. There will also be some links to other articles to complete your required information.
Quality Control is a process by which entities review the quality of all factors involved in production. ISO 9000 defines quality control as "A part of quality management focused on fulfilling quality requirements".
The Industrial Plant Inspection article provides you with information about in-service inspection of fix equipment in the industrial plants. The content will introduce you the codes and standards and summaries of important points for each equipment type.
The coating inspection article explains about the chloride test, surface profile measurements, wet and dry film thickness measurement, etc.
The Industrial Pre-Shipment inspection (PSI) article provides you with information about PSI services which are provided by third party inspection agencies.
A safety inspection is a documented or formalized procedure that is often carried out by a safety specialist to identify potential hazards. Most safety inspections involve a checklist, which helps inspectors thoroughly assess each area or potential hazard and pinpoint specific instances that may cause safety issues.

Fix Equipment Services:

The Pressure Vessel Inspections article provides you information about the inspection of pressure vessels and pressure vessel tests in a manufacturing shop. You may want to review the pressure vessel inspection procedure and corresponding inspection and test plan.
The Heat Exchanger Inspection article provides you with information about the inspection of the heat exchanger and heat exchanger testing during the manufacturing phase, as well as in-service inspection in operating units. You may want to review shell and tube heat exchanger inspection procedure and related inspection and test plan.
The Piping Inspection article provides you with information about the inspection of piping and piping testing in a construction site, as well as in operating plants.
The Valve Inspection article provides you with information about the inspection of valves and valve testing in the manufacturing shop as well as in operational plants.You may review valve inspection procedure and valve ITP articles.
The boiler inspection article provides you with information about inspection of boilers and boiler testing in manufacturing shop, as well as boiler in-service inspection in operating units. You may review water tube boiler and fire tube boiler inspection procedures.
The Above Ground Storage Tank Inspection provides you with information about the inspection of storage tanks and storage tank testing in a construction shop and site, as well as storage tank in-service inspection in operating units. You may review storage tank inspection procedure and storage tank ITP articles.
The Process Heater Inspections article provides you with information about inspection of process heater and process heater testing in the manufacturing shop and site, as well as in the operating plants.

Rotary Equipment Services:

The centrifugal pump performance test is conducted by pump manufacturer after completion of the assembly to prove the pump has the required specification as indicated in the pump datasheet and other purchase documents.
The centrifugal compressor testing article provides information about the centrifugal compressor aerodynamic testing, mechanical running test, impeller overspeed test, casing inspection and casing hydrostatic testing, impeller and rotor dynamic balancing, vibration testing and analysis and gas leakage test.
The reciprocating compressor testing article provides information about reciprocating compressor mechanical running test, aerodynamic testing, hydrostatic testing, gas leakage test, bar-over test and vibration analysis and testing.
Gas Turbine article provides a sample procedure for gas turbine inspection and gas turbine testing in the manufacturing shop. The article should be reviewed with gas turbine inspection and test paln.
Steam Turbine article provides a sample procedure for steam turbine inspection and steam turbine testing in the manufacturing shop and should be reviewed with steam turbine inspection and test plan.
Fan and Blower article provides a sample procedure for fan and blower testing and fan and blower inspection in the manufacturing shop. This article needs to be reviewed with fan and blower inspection and test plan.

E & I Equipment Services:

All electric generator inspection and generator testing is done against the approved drawings, purchase order specifications, purchasers or company standards, and within the practices and rules of the country, state or province and any government decrees, laws, ordinance or regulation as may apply.
All induction motor inspection and testing is done against the approved drawings, purchase order specifications, purchasers or company standards, and within the practices and rules of the country, state or province and any government decrees, laws, ordinance or regulation as may apply.
All power transformers inspection and testing is done against the approved drawings, purchase order specifications, purchasers or company standards, and within the practices and rules of the country, state or province and any government decrees, laws, ordinance or regulation as may apply.
All control panel inspection and testing is done against the approved drawings, purchase order specifications, purchasers or company standards, and within the practices and rules of the country, state or province and any government decrees, laws, ordinance or regulation as may apply.
All switchgear inspection and testing is done against the approved drawings, purchase order specifications, purchasers or company standards, and within the practices and rules of the country, state or province and any government decrees, laws, ordinance or regulation as may apply.
All power cable inspection and testing is done against the approved drawings, purchase order specifications, purchasers or company standards, and within the practices and rules of the country, state or province and any government decrees, laws, ordinance or regulation as may apply.

Product Compliance Services:

An energy audit is an inspection survey and an analysis of energy flows for energy conservation in a building. It may include a process or system to reduce the amount of energy input into the system without negatively affecting the output.
Infrared Thermography is a science of using electronic optical devices to detect and measure radiation and correlating that to surface temperature. ... Auditing Services of URS are designed to meet Global Standards that deliver Credibility in adoption of Energy Saving Measures using thermal imaging.
The Power Quality Audit (PQA), is a service offered by the Socomec technical support centre that checks the reliability, efficiency and safety of an organisation's electrical system. ... A reliable, efficient and safe power supply is essential for guaranteeing productivity and precision in any organisation.
A water audit, similar to an energy audit, is the method of quantifying all the flows of water in a system to understand its usage, reduce losses and improve water conservation. It can be performed on a large scale for a city or a state as well on a smaller scale for irrigation projects, industries, and buildings.
A safety audit is a structured process whereby information is collected relating to the efficiency, effectiveness, and reliability of a company's total health and safety management system. They are routinely conducted in order to determine whether the company is in compliance with safety legislation.